Open topic with navigation

PA Zones

PA Zones are defined in the Q-SYS Designer design in the Properties of the PA Router component. The number of PA Zones you specify in the design is reflected in the Administrator PA Zones tab. You assign PA Zones to Commands to control where the event, associated with the Command, is broadcast.

The PA Zones tab allows you to rename the zones, and create and assign Tags to the PA Zones.

The PA Zones are initially named Zone 1, Zone 2, and so on. Rename a PA Zone by double-clicking the name, and typing over the existing name.

NOTE:  The number next to a PA Zone identifies the pin number on the PA Router for that zone.

IMPORTANT:   When you make any changes in the Administrator, you must Update the Administrator for the changes to take effect. After making a change in a dialog box in the Administrator, and exiting the dialog box, a red banner displays across the top of the interface with an Update button, and a Cancel button.

Assigning Tags to PA Zones

Use this procedure to assign one or more Tags to a PA Zone. Refer to the Tags topic for details.

  1. Select the PA Zone (or Zones) to which you want to assign a Tag. Use Ctrl+click to select multiple zones one at a time, or Shift-click to select a series of contiguous zones.
  2. Click the check box next to the desired Tag or Tags in the Tag list. The Tag displays to the right of the PA Zone (or Zones).

NOTE:  The assigned Tags are listed alphabetically from left to right next to the PA Zone.

Filter the PA Zones by Tags

You can filter the list of PA Zones based on the Tags you assign.

  1. Click the filter icon in the top left corner. A list of Tags displays.
  2. Click the checkbox of the Tag or Tags you wish to filter by. Only the PA Zones assigned the selected Tags display.
  3. Click the filter icon again and uncheck any or all of the Tags to remove or modify the filter.

Deleting Tags

In the PA Zone list, click the X on the Tag you wish to delete. The Tag is removed from that PA Zone only.

In the Tags list (right-side pane), click the X on the Tag you wish to delete. The Tag is removed from the Tags list and any PA Zones, Commands, and Users to which it was assigned.

Core-to-Core Paging

Refer to the Core-to-Core Paging topic.

 

© 2009 - 2016 QSC, LLC. All rights reserved. QSC and the QSC logo are trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.

http://patents.qsc.com.